DT-150-PH - Heat Staking

The Basic System

The Desktop DT-150-PH Uni-Base System is the first in a line of (semi-) automatic systems developed for Heat Staking. The "PH" stands for pulsed heat Hot bar. "CH" which stands for constant heat is also available. The model "150" stands for the AMADA MIYACHI EUROPE desktop system without product movement. The Desktop Series delivers the same high bonding quality as the larger and more automated systems. It offers an ideal price-performance ratio for all production environments where labour costs are involved and can be integrated into a system and R

Options:

Hot bar Displacement Module

The Heat Staking process is a process where product deformation is most important and should be consistent. The Desktop systems offer an optional displacement module which measures the Hot bar displacement during the process cycle. The Pulsed Heat system configurations is equipped with a linear encoder with pulse counter. This encoder enables to measure the height of the dome before and after the heat staking process. Minimum and maximum limits can be set around both measurements. This will enable the user to determine if the plastic pin has the cor

Uniflow Interrupt Module (only in combination with the Displacement module)

When the displacement module reaches the pre-set limits, the Uniflow pulsed heat temperature controller can be interrupted to stop the heating process. Upon the limit, the Uniflow will leave the "reflow" state and move to the "cool" state. The reflow time will be shortened in this condition. This additional feature shortens the process times and secures the correct product output. The Uniflow Interrupt function will also allow the system to compensate for changing in product characteristics.

Product Jig Module

Using the high quality AMADA MIYACHI EUROPE product jigs ensures optimum process quality. Product jigs are extremely important because bonding quality is influenced by co-planarity of the jigs, fine-alignment of the parts and materials used for the supporting blocks. Miyachi offers many years of experience making jigs for a broad range of applications and processes. Ask our sales specialists about these modules.

Alignment Module

If your parts require accurate (fine-pitch) alignment we recommend to use an Optical Alignment Module. This includes a CCD camera with a special lens, special illumination, 7" TFT screen and power supplies. The optical system magnifies and displays the track on the TFT screen. Operator speed and operator accuracy will surely increase.